The hub motor power determines many of the performance features of the electric scooter. Higher motor power will typically result in:
higher top speed
better climbing angle
higher load capacity
to some extent, longer range
The most common power levels are:
250 Watts – usually have top speeds of 15 mph / 25 kmh or less
350 Watts – usually have top speeds between 15-22 mph / 25-35 kmh
500 Watts – usually have top speeds can go over 25 mph / 40 kmh, with some models even going as fast as 38 mph / 60 kmh
Several points that affect the cost of motor production:
1. Motor housing: (the left is plastic housing , the right is alloy housing), plastic housings will always cheaper than alloys.
And The fixing screws of the plastic motor housing are easy to loosen.
2.Enameled wire winding ( The cost of copper core wire is increasing)
The left coil height is 25MM, copper wire is 55pcs;
The right coil height is 30MM ,copper wire 63pcs.
Different enameled wiring harness of the winding will affect the output power of the motor. At the same time, it can also affect the cost factor of the motor.
3. Motor magnet steel (the permanent magnet material price fluctuations in the international market have risen sharply recently)
What we use is the standard 30mm thick. Now the cheap ones on the market are 24mm thick and 23mm thick.
The left height is 24mm, our height is 30mm.
Test Report (for Xiaomi M365 electric scooters 350W)
Copyright © 2021 Shenzhen Superbsail Technology CO.,Ltd. - All Rights Reserved.